Calendar

Cafeteria menus

To overview

Location & approach

By car

From highway “A1”

At intersection “Dortmund/Unna” change to highway “A44” in the direction of Dortmund, which becomes the B1. Take the exit “Dortmund-Dorstfeld”, in the direction of “Universität”. Turn right onto “Planetenfeldstraße”, after 850 meters turn left onto “Otto-Hahn-Straße”. After 1 km turn right onto “Marie-Curie-Allee”, after 550 meters keep slightly right to stay on “Baroper Straße”.

From highway “A45”

Take the exit “Dortmund-Eichlinghofen”, in the direction of “Universität”. Turn right onto “Stockumer Straße”, after 800 meters turn left onto “Baroper Straße”.

Please use parking lot entrances 40 or 41 for access to the “Maschinenbau III” building or entrance 42 for access to the Experimental Hall.

By bus and train

Arrival with DB to Dortmund or Bochum central station.
From Dortmund central station take the interurban train line S1 in the direction of Düsseldorf and get off at the stop “Dortmund Universität S”.
From Bochum central station with the interurban train line S1 in the direction of Dortmund and get off at the stop “Dortmund Universität S”
From the interurban stop “Dortmund Universität S”, take the elevated railway (“H-Bahn” stop “Universität S”) to the stop “Campus Süd”.

By plane

From Dortmund Airport

Take a cab to the TU Dortmund University, South Campus (“Campus Süd”) or take the AirportExpress in 20 min. to Dortmund central station. From there take the interurban train line S1 line in the direction of Düsseldorf to the stop “Dortmund Universität S” and from there the elevated railway (“H-Bahn”) to “Campus Süd”.

From Düsseldorf Airport

Take the interurban train line S1 in the direction of Dortmund and get off at the stop “Dortmund Universität S”. From here, take the elevated railway (“H-Bahn”) in the direction of “Campus Süd”.

Plan of site & interactive map

The facilities of TU Dortmund University are spread over two campuses, the larger Campus North and the smaller Campus South. Additionally, some areas of the university are located in the adjacent "Technologiepark".

> Go to interactive map

ServicePortal UniMail

Contrast Deutsch

Calendar

Cafeteria menus

To overview

Location & approach

By car

From highway “A1”

At intersection “Dortmund/Unna” change to highway “A44” in the direction of Dortmund, which becomes the B1. Take the exit “Dortmund-Dorstfeld”, in the direction of “Universität”. Turn right onto “Planetenfeldstraße”, after 850 meters turn left onto “Otto-Hahn-Straße”. After 1 km turn right onto “Marie-Curie-Allee”, after 550 meters keep slightly right to stay on “Baroper Straße”.

From highway “A45”

Take the exit “Dortmund-Eichlinghofen”, in the direction of “Universität”. Turn right onto “Stockumer Straße”, after 800 meters turn left onto “Baroper Straße”.

Please use parking lot entrances 40 or 41 for access to the “Maschinenbau III” building or entrance 42 for access to the Experimental Hall.

By bus and train

Arrival with DB to Dortmund or Bochum central station.
From Dortmund central station take the interurban train line S1 in the direction of Düsseldorf and get off at the stop “Dortmund Universität S”.
From Bochum central station with the interurban train line S1 in the direction of Dortmund and get off at the stop “Dortmund Universität S”
From the interurban stop “Dortmund Universität S”, take the elevated railway (“H-Bahn” stop “Universität S”) to the stop “Campus Süd”.

By plane

From Dortmund Airport

Take a cab to the TU Dortmund University, South Campus (“Campus Süd”) or take the AirportExpress in 20 min. to Dortmund central station. From there take the interurban train line S1 line in the direction of Düsseldorf to the stop “Dortmund Universität S” and from there the elevated railway (“H-Bahn”) to “Campus Süd”.

From Düsseldorf Airport

Take the interurban train line S1 in the direction of Dortmund and get off at the stop “Dortmund Universität S”. From here, take the elevated railway (“H-Bahn”) in the direction of “Campus Süd”.

Plan of site & interactive map

The facilities of TU Dortmund University are spread over two campuses, the larger Campus North and the smaller Campus South. Additionally, some areas of the university are located in the adjacent "Technologiepark".

> Go to interactive map

ServicePortal UniMail

Shape Prediction and Improvement for Canning of Non-Round Tubes

01/01/2018 -

in

Profil- und Blechumformung
RECIMP
Technologieentwicklung
Industrienahe Forschung

Consistent prediction of the shape along the process chain of forming and canning

Funding	ReCIMP
Contact	Markus Stennei M. Sc.
Status	Completed

The reduction of CO₂ emissions requires an improved scrap rate during production. For this purpose, the forming process chain (calibrating and end forming, see figure) and the deformation due to the insertion of a coated ceramic (canning, see figure) of non-round exhaust components were numerically examined in this project. One challenge was the consideration of unknown or variable process parameters in the simulation. The implementation of mechanical forming in the software was developed to predict the resulting shape with respect to the required accuracy. Numerical modeling of the subsequrent canning process was set up with a representive pressure due to the large tolerances during manufacturing. This pressure can be determined from given measurement data and imposed in the FEM software using a specially developed program. Using this approach, the influence of the canning process is now predictable with the desired accuracy.