Calendar

Cafeteria menus

To overview

Location & approach

By car

From highway “A1”

At intersection “Dortmund/Unna” change to highway “A44” in the direction of Dortmund, which becomes the B1. Take the exit “Dortmund-Dorstfeld”, in the direction of “Universität”. Turn right onto “Planetenfeldstraße”, after 850 meters turn left onto “Otto-Hahn-Straße”. After 1 km turn right onto “Marie-Curie-Allee”, after 550 meters keep slightly right to stay on “Baroper Straße”.

From highway “A45”

Take the exit “Dortmund-Eichlinghofen”, in the direction of “Universität”. Turn right onto “Stockumer Straße”, after 800 meters turn left onto “Baroper Straße”.

Please use parking lot entrances 40 or 41 for access to the “Maschinenbau III” building or entrance 42 for access to the Experimental Hall.

By bus and train

Arrival with DB to Dortmund or Bochum central station.
From Dortmund central station take the interurban train line S1 in the direction of Düsseldorf and get off at the stop “Dortmund Universität S”.
From Bochum central station with the interurban train line S1 in the direction of Dortmund and get off at the stop “Dortmund Universität S”
From the interurban stop “Dortmund Universität S”, take the elevated railway (“H-Bahn” stop “Universität S”) to the stop “Campus Süd”.

By plane

From Dortmund Airport

Take a cab to the TU Dortmund University, South Campus (“Campus Süd”) or take the AirportExpress in 20 min. to Dortmund central station. From there take the interurban train line S1 line in the direction of Düsseldorf to the stop “Dortmund Universität S” and from there the elevated railway (“H-Bahn”) to “Campus Süd”.

From Düsseldorf Airport

Take the interurban train line S1 in the direction of Dortmund and get off at the stop “Dortmund Universität S”. From here, take the elevated railway (“H-Bahn”) in the direction of “Campus Süd”.

Plan of site & interactive map

The facilities of TU Dortmund University are spread over two campuses, the larger Campus North and the smaller Campus South. Additionally, some areas of the university are located in the adjacent "Technologiepark".

> Go to interactive map

ServicePortal UniMail

Contrast Deutsch

Calendar

Cafeteria menus

To overview

Location & approach

By car

From highway “A1”

At intersection “Dortmund/Unna” change to highway “A44” in the direction of Dortmund, which becomes the B1. Take the exit “Dortmund-Dorstfeld”, in the direction of “Universität”. Turn right onto “Planetenfeldstraße”, after 850 meters turn left onto “Otto-Hahn-Straße”. After 1 km turn right onto “Marie-Curie-Allee”, after 550 meters keep slightly right to stay on “Baroper Straße”.

From highway “A45”

Take the exit “Dortmund-Eichlinghofen”, in the direction of “Universität”. Turn right onto “Stockumer Straße”, after 800 meters turn left onto “Baroper Straße”.

Please use parking lot entrances 40 or 41 for access to the “Maschinenbau III” building or entrance 42 for access to the Experimental Hall.

By bus and train

Arrival with DB to Dortmund or Bochum central station.
From Dortmund central station take the interurban train line S1 in the direction of Düsseldorf and get off at the stop “Dortmund Universität S”.
From Bochum central station with the interurban train line S1 in the direction of Dortmund and get off at the stop “Dortmund Universität S”
From the interurban stop “Dortmund Universität S”, take the elevated railway (“H-Bahn” stop “Universität S”) to the stop “Campus Süd”.

By plane

From Dortmund Airport

Take a cab to the TU Dortmund University, South Campus (“Campus Süd”) or take the AirportExpress in 20 min. to Dortmund central station. From there take the interurban train line S1 line in the direction of Düsseldorf to the stop “Dortmund Universität S” and from there the elevated railway (“H-Bahn”) to “Campus Süd”.

From Düsseldorf Airport

Take the interurban train line S1 in the direction of Dortmund and get off at the stop “Dortmund Universität S”. From here, take the elevated railway (“H-Bahn”) in the direction of “Campus Süd”.

Plan of site & interactive map

The facilities of TU Dortmund University are spread over two campuses, the larger Campus North and the smaller Campus South. Additionally, some areas of the university are located in the adjacent "Technologiepark".

> Go to interactive map

ServicePortal UniMail

Kinematic Profile Bending with Locally Heated Cross Section

07/01/2019 -

in

Massivumformung
Umformtechnische Grundlagenforschung
Technologieentwicklung

© IUL

a) Process principle, b) Profile cross section after forming, c) Springback, d) Warping

Funding	German Research Foundation (DFG)
Project	408302329
Contact	Eike Hoffmann M. Sc.

In this project the suitability of partial heating of asymmetric profiles for the reduction of geometrical deviations in bending is examined. In conventional bending of profiles with asymmetric cross section regarding the force initiation axis, the difference of shear center position and position of the force initiation axis leads to warping. To avoid warping, the profiles are partially heated through induction (see Figure a). Consequently, the position of the shear center changes due to thermal softening in the heated area. Through the change of position in direction of the force initiation axis the length of the torsional lever arm and, as a result, the torsion moment are reduced (see Figure b). For the geometrical result the heating temperature and the selection of the heated area is relevant. Currently, the behavior during bending of L-profiles with partial heating temperatures of up to 600 °C is investigated. In the comparison with conventionally bent profiles a springback reduction of up to 56% (see Figure c) as well as a warping reduction of up to 76% has been achieved (see Figure d).