Calendar

Cafeteria menus

To overview

Location & approach

By car

From highway “A1”

At intersection “Dortmund/Unna” change to highway “A44” in the direction of Dortmund, which becomes the B1. Take the exit “Dortmund-Dorstfeld”, in the direction of “Universität”. Turn right onto “Planetenfeldstraße”, after 850 meters turn left onto “Otto-Hahn-Straße”. After 1 km turn right onto “Marie-Curie-Allee”, after 550 meters keep slightly right to stay on “Baroper Straße”.

From highway “A45”

Take the exit “Dortmund-Eichlinghofen”, in the direction of “Universität”. Turn right onto “Stockumer Straße”, after 800 meters turn left onto “Baroper Straße”.

Please use parking lot entrances 40 or 41 for access to the “Maschinenbau III” building or entrance 42 for access to the Experimental Hall.

By bus and train

Arrival with DB to Dortmund or Bochum central station.
From Dortmund central station take the interurban train line S1 in the direction of Düsseldorf and get off at the stop “Dortmund Universität S”.
From Bochum central station with the interurban train line S1 in the direction of Dortmund and get off at the stop “Dortmund Universität S”
From the interurban stop “Dortmund Universität S”, take the elevated railway (“H-Bahn” stop “Universität S”) to the stop “Campus Süd”.

By plane

From Dortmund Airport

Take a cab to the TU Dortmund University, South Campus (“Campus Süd”) or take the AirportExpress in 20 min. to Dortmund central station. From there take the interurban train line S1 line in the direction of Düsseldorf to the stop “Dortmund Universität S” and from there the elevated railway (“H-Bahn”) to “Campus Süd”.

From Düsseldorf Airport

Take the interurban train line S1 in the direction of Dortmund and get off at the stop “Dortmund Universität S”. From here, take the elevated railway (“H-Bahn”) in the direction of “Campus Süd”.

Plan of site & interactive map

The facilities of TU Dortmund University are spread over two campuses, the larger Campus North and the smaller Campus South. Additionally, some areas of the university are located in the adjacent "Technologiepark".

> Go to interactive map

ServicePortal UniMail

Contrast Deutsch

Calendar

Cafeteria menus

To overview

Location & approach

By car

From highway “A1”

At intersection “Dortmund/Unna” change to highway “A44” in the direction of Dortmund, which becomes the B1. Take the exit “Dortmund-Dorstfeld”, in the direction of “Universität”. Turn right onto “Planetenfeldstraße”, after 850 meters turn left onto “Otto-Hahn-Straße”. After 1 km turn right onto “Marie-Curie-Allee”, after 550 meters keep slightly right to stay on “Baroper Straße”.

From highway “A45”

Take the exit “Dortmund-Eichlinghofen”, in the direction of “Universität”. Turn right onto “Stockumer Straße”, after 800 meters turn left onto “Baroper Straße”.

Please use parking lot entrances 40 or 41 for access to the “Maschinenbau III” building or entrance 42 for access to the Experimental Hall.

By bus and train

Arrival with DB to Dortmund or Bochum central station.
From Dortmund central station take the interurban train line S1 in the direction of Düsseldorf and get off at the stop “Dortmund Universität S”.
From Bochum central station with the interurban train line S1 in the direction of Dortmund and get off at the stop “Dortmund Universität S”
From the interurban stop “Dortmund Universität S”, take the elevated railway (“H-Bahn” stop “Universität S”) to the stop “Campus Süd”.

By plane

From Dortmund Airport

Take a cab to the TU Dortmund University, South Campus (“Campus Süd”) or take the AirportExpress in 20 min. to Dortmund central station. From there take the interurban train line S1 line in the direction of Düsseldorf to the stop “Dortmund Universität S” and from there the elevated railway (“H-Bahn”) to “Campus Süd”.

From Düsseldorf Airport

Take the interurban train line S1 in the direction of Dortmund and get off at the stop “Dortmund Universität S”. From here, take the elevated railway (“H-Bahn”) in the direction of “Campus Süd”.

Plan of site & interactive map

The facilities of TU Dortmund University are spread over two campuses, the larger Campus North and the smaller Campus South. Additionally, some areas of the university are located in the adjacent "Technologiepark".

> Go to interactive map

ServicePortal UniMail

Production of Flange-Shaped Components by Cold Forging of Composite Hot Extruded Semi-Finished Products

07/01/2019 -

in

Massivumformung
Umformtechnische Grundlagenforschung

© IUL

a) Process sequence, b) Profile cross section with steel and copper as reinforcements, c) Process window aluminum − steel

Funding	Germand Research Foundation (DFG)
Project	404239924
Contact	Patrick Kotzyba M. Sc.
Status	Completed

The aim of the project was the development of a process route consisting of composite extrusion with tubular reinforcing elements and subsequent lateral extrusion to produce flange-shaped components. While the extrusion process (see Figure a) was carried out at the IUL, the Institute for Metal Forming Technology (IFU) at the University of Stuttgart took over the further processing of the semi-finished products by means of lateral extrusion. Initially, hybrid profiles were extruded from the combination of AA6060 as matrix material and AA7075 as reinforcing element. Here, the maximum diameter of the reinforcing element is limited by the shear zone during extrusion. In the case of steel and copper reinforcing elements, the length of the reinforcing elements has an influence on the success of the process. If this length exceeds a critical value, the reinforcing element experiences high tensile stresses, resulting in failure of the tube. The diameters of the tubes must not exceed the diameter of the die for these two materials.