Calendar

Cafeteria menus

To overview

Location & approach

By car

From highway “A1”

At intersection “Dortmund/Unna” change to highway “A44” in the direction of Dortmund, which becomes the B1. Take the exit “Dortmund-Dorstfeld”, in the direction of “Universität”. Turn right onto “Planetenfeldstraße”, after 850 meters turn left onto “Otto-Hahn-Straße”. After 1 km turn right onto “Marie-Curie-Allee”, after 550 meters keep slightly right to stay on “Baroper Straße”.

From highway “A45”

Take the exit “Dortmund-Eichlinghofen”, in the direction of “Universität”. Turn right onto “Stockumer Straße”, after 800 meters turn left onto “Baroper Straße”.

Please use parking lot entrances 40 or 41 for access to the “Maschinenbau III” building or entrance 42 for access to the Experimental Hall.

By bus and train

Arrival with DB to Dortmund or Bochum central station.
From Dortmund central station take the interurban train line S1 in the direction of Düsseldorf and get off at the stop “Dortmund Universität S”.
From Bochum central station with the interurban train line S1 in the direction of Dortmund and get off at the stop “Dortmund Universität S”
From the interurban stop “Dortmund Universität S”, take the elevated railway (“H-Bahn” stop “Universität S”) to the stop “Campus Süd”.

By plane

From Dortmund Airport

Take a cab to the TU Dortmund University, South Campus (“Campus Süd”) or take the AirportExpress in 20 min. to Dortmund central station. From there take the interurban train line S1 line in the direction of Düsseldorf to the stop “Dortmund Universität S” and from there the elevated railway (“H-Bahn”) to “Campus Süd”.

From Düsseldorf Airport

Take the interurban train line S1 in the direction of Dortmund and get off at the stop “Dortmund Universität S”. From here, take the elevated railway (“H-Bahn”) in the direction of “Campus Süd”.

Plan of site & interactive map

The facilities of TU Dortmund University are spread over two campuses, the larger Campus North and the smaller Campus South. Additionally, some areas of the university are located in the adjacent "Technologiepark".

> Go to interactive map

ServicePortal UniMail

Contrast Deutsch

Calendar

Cafeteria menus

To overview

Location & approach

By car

From highway “A1”

At intersection “Dortmund/Unna” change to highway “A44” in the direction of Dortmund, which becomes the B1. Take the exit “Dortmund-Dorstfeld”, in the direction of “Universität”. Turn right onto “Planetenfeldstraße”, after 850 meters turn left onto “Otto-Hahn-Straße”. After 1 km turn right onto “Marie-Curie-Allee”, after 550 meters keep slightly right to stay on “Baroper Straße”.

From highway “A45”

Take the exit “Dortmund-Eichlinghofen”, in the direction of “Universität”. Turn right onto “Stockumer Straße”, after 800 meters turn left onto “Baroper Straße”.

Please use parking lot entrances 40 or 41 for access to the “Maschinenbau III” building or entrance 42 for access to the Experimental Hall.

By bus and train

Arrival with DB to Dortmund or Bochum central station.
From Dortmund central station take the interurban train line S1 in the direction of Düsseldorf and get off at the stop “Dortmund Universität S”.
From Bochum central station with the interurban train line S1 in the direction of Dortmund and get off at the stop “Dortmund Universität S”
From the interurban stop “Dortmund Universität S”, take the elevated railway (“H-Bahn” stop “Universität S”) to the stop “Campus Süd”.

By plane

From Dortmund Airport

Take a cab to the TU Dortmund University, South Campus (“Campus Süd”) or take the AirportExpress in 20 min. to Dortmund central station. From there take the interurban train line S1 line in the direction of Düsseldorf to the stop “Dortmund Universität S” and from there the elevated railway (“H-Bahn”) to “Campus Süd”.

From Düsseldorf Airport

Take the interurban train line S1 in the direction of Dortmund and get off at the stop “Dortmund Universität S”. From here, take the elevated railway (“H-Bahn”) in the direction of “Campus Süd”.

Plan of site & interactive map

The facilities of TU Dortmund University are spread over two campuses, the larger Campus North and the smaller Campus South. Additionally, some areas of the university are located in the adjacent "Technologiepark".

> Go to interactive map

ServicePortal UniMail

Increasing the Forming Limits by Heat-Assisted Bending below the Recrystallization Temperature

07/01/2021 -

in

Profil- und Blechumformung
RECIMP
Technologieentwicklung
Industrienahe Forschung

a) Design of the bending tool and part with cracks, b) Inductive heating before bending as well as component after bending

Funding	ReCIMP
Contact	Manish Chowdary Ghattamaneni M. Sc.

Formability of metallic materials is limited. Common practice is to extend the forming limits by hot forming above the recrystallization temperature. A significant disadvantage of this method is that the initial microstructure is altered by heating. As a result, the properties of the heated material deviate from those of the initial material. The aim of this project is to extend the forming limits of press-hardenable manganese-boron steel sheets by providing temperature support below the recrystallization temperature without causing an undesirable change in the initial microstructure. Thus, hardening of the components after the bending step is still possible. In the case of the investigated component geometry made of manganese-boron steel cracks occur during bending at room temperature (RT) at the outer bend (see Figure a). To avoid these cracks, the bending step is preceded by local induction heating of the bending zone to the temperature T_Heating(see Figure b).