Calendar

Cafeteria menus

To overview

Location & approach

By car

From highway “A1”

At intersection “Dortmund/Unna” change to highway “A44” in the direction of Dortmund, which becomes the B1. Take the exit “Dortmund-Dorstfeld”, in the direction of “Universität”. Turn right onto “Planetenfeldstraße”, after 850 meters turn left onto “Otto-Hahn-Straße”. After 1 km turn right onto “Marie-Curie-Allee”, after 550 meters keep slightly right to stay on “Baroper Straße”.

From highway “A45”

Take the exit “Dortmund-Eichlinghofen”, in the direction of “Universität”. Turn right onto “Stockumer Straße”, after 800 meters turn left onto “Baroper Straße”.

Please use parking lot entrances 40 or 41 for access to the “Maschinenbau III” building or entrance 42 for access to the Experimental Hall.

By bus and train

Arrival with DB to Dortmund or Bochum central station.
From Dortmund central station take the interurban train line S1 in the direction of Düsseldorf and get off at the stop “Dortmund Universität S”.
From Bochum central station with the interurban train line S1 in the direction of Dortmund and get off at the stop “Dortmund Universität S”
From the interurban stop “Dortmund Universität S”, take the elevated railway (“H-Bahn” stop “Universität S”) to the stop “Campus Süd”.

By plane

From Dortmund Airport

Take a cab to the TU Dortmund University, South Campus (“Campus Süd”) or take the AirportExpress in 20 min. to Dortmund central station. From there take the interurban train line S1 line in the direction of Düsseldorf to the stop “Dortmund Universität S” and from there the elevated railway (“H-Bahn”) to “Campus Süd”.

From Düsseldorf Airport

Take the interurban train line S1 in the direction of Dortmund and get off at the stop “Dortmund Universität S”. From here, take the elevated railway (“H-Bahn”) in the direction of “Campus Süd”.

Plan of site & interactive map

The facilities of TU Dortmund University are located on two campuses, the larger North Campus and the smaller South Campus. In addition, some university facilities are located in the adjacent Dortmund Technology Park as well as in the city center and the wider urban area.

> Go to interactive map

ServicePortal UniMail

Contrast Deutsch

Calendar

Cafeteria menus

To overview

Location & approach

By car

From highway “A1”

At intersection “Dortmund/Unna” change to highway “A44” in the direction of Dortmund, which becomes the B1. Take the exit “Dortmund-Dorstfeld”, in the direction of “Universität”. Turn right onto “Planetenfeldstraße”, after 850 meters turn left onto “Otto-Hahn-Straße”. After 1 km turn right onto “Marie-Curie-Allee”, after 550 meters keep slightly right to stay on “Baroper Straße”.

From highway “A45”

Take the exit “Dortmund-Eichlinghofen”, in the direction of “Universität”. Turn right onto “Stockumer Straße”, after 800 meters turn left onto “Baroper Straße”.

Please use parking lot entrances 40 or 41 for access to the “Maschinenbau III” building or entrance 42 for access to the Experimental Hall.

By bus and train

Arrival with DB to Dortmund or Bochum central station.
From Dortmund central station take the interurban train line S1 in the direction of Düsseldorf and get off at the stop “Dortmund Universität S”.
From Bochum central station with the interurban train line S1 in the direction of Dortmund and get off at the stop “Dortmund Universität S”
From the interurban stop “Dortmund Universität S”, take the elevated railway (“H-Bahn” stop “Universität S”) to the stop “Campus Süd”.

By plane

From Dortmund Airport

Take a cab to the TU Dortmund University, South Campus (“Campus Süd”) or take the AirportExpress in 20 min. to Dortmund central station. From there take the interurban train line S1 line in the direction of Düsseldorf to the stop “Dortmund Universität S” and from there the elevated railway (“H-Bahn”) to “Campus Süd”.

From Düsseldorf Airport

Take the interurban train line S1 in the direction of Dortmund and get off at the stop “Dortmund Universität S”. From here, take the elevated railway (“H-Bahn”) in the direction of “Campus Süd”.

Plan of site & interactive map

The facilities of TU Dortmund University are located on two campuses, the larger North Campus and the smaller South Campus. In addition, some university facilities are located in the adjacent Dortmund Technology Park as well as in the city center and the wider urban area.

> Go to interactive map

ServicePortal UniMail

Technology development

This could be a short general description.

Current projects

There are no current entries.

Completed projects

Reducing the Stair Step Effect for Dies Manufactured by Layer-Laminated Manufacturing by Additive and Formative Post-Processing

Manufacturing the deep drawing tool by hybrid manufacturing with deep drawing depth of 21 mm and deep drawing ratio of 1.9

Optimized Working Coil Windings for Electromagnetic Forming Employing Additive Manufacturing Techniques

a) Assembly-based hybrid coil, b) Single ring, c) Side supports, d) Comparison experiment/prognosis (sheet work piece)

Functionalization of Additively Manufactured Hot Stamping Tools Using Ball Burnishing

a) Surface properties, b-d) Additive manufacturing of cooling channels: procedure and preliminary tests

Process for Manufacturing Composite Components by a Combination of Deep Drawing and Cold Forging

a-d) Process with counter holder, e) Asymmetrically and f) Symmetrically encapsulated component

Media-Based Profile Shaping and Kinematic Bending in a Continuous Process Using a Graded Temperature Field

a) Hot-Tube-Bulge-Test setup, b) Determined forming limits at 1000 °C including the strain paths

Improvement of Product Properties by Selective Induction of Residual Stresses in Incremental Sheet Metal Forming

Comparative structural strength test with in-situ corrosion

Kinematic Profile Bending with Locally Heated Cross Section

Composite Cold Forging of Cold-Forged Semi-Finished Parts

a) Process route for composite cold forging, b) Hollow demonstration part

Incremental Sheet-Bulk Metal Forming by Application of Thermally-Controlled Grading Mechanisms

a) Cold/warm iSBMF, b) Required temperature field, c) Heated part, d) Resulting temperature field

Forming by Locally Varying Vaporizing Actuators

Researched computation possibilities and selected experiment

Shape Prediction and Improvement for Canning of Non-Round Tubes

Consistent prediction of the shape along the process chain of forming and canning

Fundamental Research and Process Development for the Manufacturing of Load-Optimized Parts by Incremental Forming of Metal Sheets – Incremental Sheet-Bulk Metal Forming (iSBMF)

a) Schematic setup, b) Resulting current density, c) Measured impact on the forming force